SUNBOUNCE “BOUNCE-WALL”

The SUNBOUNCE “BOUNCE-WALL” is a compact system consisting of a supporting arm, flexible bracket and replaceable reflectors; it is simply screwed into the tripod thread of the camera. With the “BOUNCE-WALL”, the detachable flash becomes a creative professional tool - and it only takes seconds. No more nonsense "over the ceiling flash" or unimaginative straight-ahead flashes: the “BOUNCE-WALL” frees the photographer from the light constraints on location. Expressive, indirect, illumination can be achieved without an assistant or much effort. With the exchangeable reflectors in proven SUNBOUNCE quality, the tone of the main light can be controlled - ideal for soft portraits and targeted lightening of foregrounds.

The supporting arm of the “BOUNCE-WALL” is made of a sturdy, lightweight plastic and can be quickly disassembled and put back together. So this novelty can be easily carried in your camera bag and is quickly ready for use. The desired reflector fits snugly into the bracket and, thanks to the ball joint, can be flexibly adapted in the angle. The “BOUNCE-WALL” requires neither electrical connections nor trigger or control cables; it is right on the side of the camera. When the flash reflector is turned towards the “BOUNCE-WALL”, the photographer flashes directly into the reflector, which projects the light softly and precisely onto the main subject. So the photographer has TTL flash control as well as measurement of light distribution on the optical axis right at his fingertips.

The effect of the “BOUNCE-WALL” can also be controlled with the system's flash: If the zoom reflector is set to telephoto, a tightly bundled beam hits the reflector. Light on the main subject is harder and more focused. When the flash reflector is set to wide-angle, more light is cast on the surroundings, where it is reflected and provides for additional basic illumination.

SUNBOUNCE's many years of experience with professional light enhancements and reflectors were essential assets in the development of the “BOUNCE-WALL”. Anyone who has worked with the SUNBOUNCER will be delighted with the compact version of these ingenious reflectors for flash photography. The lightweight yet durable plastic reflectors are no bigger than a standard piece of paper, yet they are revolutionizing modern flashing.

SUNBOUNCE offers six different reflector coatings, including the classics “Silver”, “Zebra Silver/White” and “Zebra Gold/White” - depending on whether the photographer prefers the most neutral light possible or a warmer tone (e.g. for portraits).

A new reflector from SUNBOUNCE' idea factory is the "Galaxy Gold/White." With the clever distribution of color on the reflective surface, the center of the light in the main subject can be accentuated. For example, the model's face can be emphasized with warm light.

For all reflectors that modify the color of the light (e.g. "Zebra Gold"): Unlike conventional filter films over the flash reflector, the change in color affects primarily the model, while leaving the ambient light untouched.

By the way: The BOUNCE-WALL also works without a system flash: The ultra-compact mobile reflector can be used with the sun as the source of light. Light enhancement in proven SUNBOUNCE quality - the solution that's with you all the time!

www.sunbounce.com

COMMENTS
Serenity813's picture

I have been using this tool for a while now, and I can say that I was never been disappointed with the work. Really worth the money. - o2 media

X