Still not finished reading forum problem posts about “prints too dark” because I was curious if an “LCD too bright” was a problem for many users. Putting that phrase into a Google search got 336,000 replies, not nearly like the 1.9 million “prints too dark” produces though, but significant. Then today a laptop user with the prints too dark problem e-mailed me, and I responded that to get better control and results when doing digital photography editing with a laptop an advantage is to plug into a desktop LCD display, and calibrate and profile it.
Not finished, nor ever expect to anytime soon, going back and spending a good part of the weekend reading “prints too dark” complaints and commentary on digital photography forums. It was no trouble finding plenty of examples posted on popular digital photography web sites. What was surprising was the diversity of situations described involving the problem of getting too dark prints, leading to a great variety of speculation as to what was causing the darkness of the prints produced, as well as just as wide an expanse of suggestions of why there is a problem and what fixes might be applied.
First to bring you up to date. Since my workflow article ran in the December issue of Shutterbug, word has gotten around and back to me providing lots of information for a better picture of the problem. I have done more testing, which concluded even for a well color managed system like my own with LCD’s there is some darkening in print results because of color correcting and editing with an LCD with screen brightness set exactly at a luminance of 120.0 CD/m2. I confirmed this by opening some finished scanned image in Photoshop, files done when I had CRT monitors installed and then stored on CD’s that have been printed in the past. These image files look fine in terms of density on my LCD screen, and print as they did in the past achieving the same print density the screen appearance would suggest to expect. I have to assume the reason is that the image brightness midpoint setting in Levels made using a CRT monitor with a white point luminance of 90.0 CD/m2 (which was not changed for this current and test and printing), and the correct brightness of the print is because the brightness range of the CRT closely matched the density range of a high quality inkjet print.
This old saying can be taken as a blessing or a curse, and its origins may be Yiddish or ancient Chinese, but if you are into digital photography the next few years may well be interesting times. Two pieces of news today are indicative of changes ahead. One is relative to my blog post recently about being connected. Apparently the FCC chairman Kevin Martin, a lightening rod of controversy is reported to have backed down on taking a Commission vote on a dubious proposal to auction vacant airwaves to provide a “free” broadband connection capability. Now of course making broadband internet connection more widely available everyone can afford is laudable on the outset; but some of the provisions and the way the proposal was worded in detail gives great pause that public benefit really was the goal of what Martin wanted the FCC to approve.
Yesterday there was news of yet another PC hardware maker with a new model that is supposed to run the Apple Operating System, from a company called EFi-X USA you can read about in articles found at: http://www.google.com/search?source=ig&hl=en&rlz=&q=efi-x+usa&aq=1&oq=EFI-X
It was not that long ago that a Florida company, Psystar, tried marketing a PC that would run the Apple OS and ran into strong legal opposition from Apple. So this begs a couple of questions, is there a market for PC hardware that will run the Apple Operating System software; and if so does this indicate a weakness in the Apple Mac computer model line-up?
The last two days have been a bleary-eyed ordeal reading as many forum posts as I could on “prints too dark” from a Google search on that phrase, which obtains almost 2 million results. What I was looking for was as complete a picture as possible why people trying to make photo prints were getting unacceptably dark print output. I didn’t get very far into the almost 2 million results before my eyes gave out reading the forum posts, but I did find that a lot of users have discovered the cause of dark prints is an LCD display that is too bright. But confusion reigns when it comes to how to fix the problem, very often involving color management and the idea of using Photoshop’s “soft proofing”. Some forum gurus have been recommending adjusting the display brightness to match the print output, and actually that practical philosophy was used before there was such a thing as Color Management, but it largely precludes color matching using CM and a calibrated and profiled display, if in reality an LCD display can be reduced in brightness to actually match the range of print densities or the CRT monitors of the past. Some users found that instead of having their photo editing application control color, select having the printer driver control color, which with some printer drivers does provide an output print density adjustment and yields satisfactory print brightness results, but the downside is that some printer drivers will automatically adjust print density and others don’t, as well as color matching with what you see on-screen is not usually supported.
From the e-mail and forum posts I have read Apple iMac photographer users are having the most difficulty with a too bright screen, and prints too dark. Thanks to one correspondent, Pat Marchitto who alerted me to Phil Corley’s web site
(http://www.philcorley.com/articles_68520.html) a solution has been found to lower the screen brightness to calibrate and profile for better print matching.
A lot was said by the press about the possibility once in the Whitehouse Barrack Obama may lose access to his Blackberry. And more recently as some bits and pieces have leaked out about the plans to provide an economic stimulus and jobs initiative, one of the items recently was to do something about internet access. Anything could be better than what currently exists considering that among the advanced free-world nations the US is way down the list in providing broadband access to its citizens. And as Obama has suggested he will use the internet to be connected to the public to create a more open and accessible administration to Americans that hopefully could enable a greater participation in government by citizens. If nothing else this is also an education issue as it provides access to information for students, a digital highway to a library.
I don’t know if you have noticed on TV, but ads for some new flat screen TV’s are now touting mind boggling figures for contrast-ratio of a million to one. Can anyone see a million to one? Or does it matter in the definition of a talking head’s picture on screen to what the pundit is saying about his crystal ball into the future of Barack Obama’s governance after January 20? Technical specification have been a boon to imaginative marketing mavens ever since cars were described as having horsepower, and the race goes on for who can concoct the most outlandish claims.
When I began this blog the last thing I had in mind was commenting on other blogs, but in ZDnet.com’s Mary-Jo Foley blog, her plea to Microsoft programmers to NOT make the next Windows too Mac-like, had me laughing and fuming at the same time. (http://blogs.zdnet.com/microsoft/?p=1747&tag=nl.e539) Especially today after reading in the New York Times David Pogue page with a section on Maintaining The Mac, (http://www.nytimes.com/2008/12/04/technology/personaltech/04askk-002.htm...) which amounted to almost nothing unless one is paranoid by disposition. I switched from Windows to Apple Mac almost a decade ago and have had virtually no maintenance that needed to be done in that period of intense computer work, compared to it being an almost constant chore before with Windows. But what really got me was what Mary-Jo put in her wish list “fewer UAC prompts, simpler backup and restore, better peripheral handling” which are all current included features of the Apple OS!