Forums
Home » Forums » Digital Help » Digital Darkroom
3 replies [Last post]
Toni's picture
Submitted By: Toni
Joined: Aug 24 2010
Posts:
Epson Photo 2200
Posted: August 27, 2010 - 6:03pm

Paper went through my 2200 crooked and bunched up and now it doesn't print properly. I tried to align the heads and I got a half inch stripe of very wet (almost dripping)ink. Is it done for?

Top
lightontheland's picture
Submitted By: lightontheland
Location: Crossville, TN
Joined: Jun 2 2005
Posts:
#1
Re: Epson Photo 2200
Posted: August 27, 2010 - 6:20pm

Does paper feed properly now? You might make sure the paper thickness adjustment lever on the right side hasn't been moved from it's normal position for your paper/type of feed (auto or manual), etc.

Top
Toni's picture
Submitted By: Toni
Joined: Aug 24 2010
Posts:
#2
Re: Epson Photo 2200
Posted: August 30, 2010 - 6:52am

Thanks for the tip. I looked at the paper lever and it was set for regular paper so I moved it from thin to thick and back to thin paper and printed and it works fine!!! Maybe it moved a little bit to thicker paper when the bunched up paper went through.

Top
lightontheland's picture
Submitted By: lightontheland
Location: Crossville, TN
Joined: Jun 2 2005
Posts:
#3
Re: Epson Photo 2200
Posted: August 30, 2010 - 1:55pm

Glad I could help. And, thanks for the feedback...

Top

 

  •  
  •